-
FULL-LENGTH DIE SET – .28 NOSLER GROUP D – BOTTLENECK RIFLE CARTRIDGES
Accessories, Reloading $111.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – .30 NOSLER GROUP D – BOTTLENECK RIFLE CARTRIDGES
Accessories, Reloading $120.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 224 VALKYRIE GROUP D – BOTTLENECK RIFLE CARTRIDGES
Accessories, Reloading $111.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 30-06 SPRG GROUP A
Accessories, Reloading $59.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 300 WSM GROUP A
Accessories, Reloading $59.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 308 WIN GROUP A
Accessories, Reloading $64.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 338 LAPUA GROUP A
Accessories, Reloading $64.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 6.5 CREEDMOOR GROUP D – BOTTLENECK RIFLE CARTRIDGES
Accessories, Reloading $126.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 6.5X55 SWEDISH GROUP A
Accessories, Reloading $75.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
FULL-LENGTH DIE SET – 6MM CREEDMOOR GROUP D – BOTTLENECK RIFLE CARTRIDGES
Accessories, Reloading $120.95This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
-
Hornady AMERICAN 3DIE SET (38 SPC / 357 MAG)
Accessories, Reloading $65.95Perfect for the hand loader looking to maximize the efficiency of their reloads, American Series die sets deliver excellent reloading performance at an unbeatable price. Its die bodies are precision reamed from premium steel that is hardened to exacting specifications. They are then polished to a smooth finish that will endure the rigors of countless reloading sessions. Included is a free shell holder, sizing die, select pistol dies basic reloading data, and two extra decapping pins.
American Series, 3-Die Set
38 Special / 357 Mag
Shell Holder Included
-
Hornady AMERICAN 3DIE SET (45 Auto)
Accessories, Reloading $65.95Perfect for the hand loader looking to maximize the efficiency of their reloads, American Series die sets deliver excellent reloading performance at an unbeatable price. Its die bodies are precision reamed from premium steel that is hardened to exacting specifications. They are then polished to a smooth finish that will endure the rigors of countless reloading sessions. Included is a free shell holder, sizing die, select pistol dies basic reloading data, and two extra decapping pins.
American Series, 3-Die Set
45 Auto
Shell Holder Included
CANADA WIDE SHIPPING
OUR SPECIAL SALES
MY CART
Testimonials
Josh Merasty
Irma has always been very friendly anytime I’ve been there. She’s always been happy to answer any questions that I have had. Top notch.Katie Fairbrother Crash
Love the store always got what I need and if they don’t have exactly what I am lookin for they have something similar. Great store awesome employees and a great set up it has come a long way since I first seen it! Great job.